Danfoss VLT OneGearDrive, Руководство по эксплуатации

Страница: 10 / 36

2.5 Assembly Kit
6 1 3 2 4 5
Holding
130BC006.11
Illustration 2.1 Assembly Kit
1 Shaft
2 Disc
3 Retaining ring
4 Lock washer
5 Fixing screw (filister head)
6 Key
Table 2.1 Legend to Illustration 2.1
Type Dimensions [mm]
Retaining ring (3)
DIN 472
Lock washer (4)
DIN 7980
Fixing screw (5)
DIN 912-8.8
Key (6)
DIN 6885
Width x Height x Length
OGD-30 30x1.2 10 M10x30
A 8x7x100 1)
OGD-35 35x1.5 12 M12x35
A 10x8x100 1)
OGD-40 40x1.75 16 M16x35
A 12x8x100 1)
Table 2.2 Dimensions
1) Key length required for b
min
in Table 2.3. Adapt the key length according to the shaft length used (b) in Table 2.3.
The dimensions shown could differ from the customer conditions and must potentially be changed by the customer.
Installation
VLT
®
OneGearDrive Operating Instructions
8 MG75C302 - VLT
®
is a registered Danfoss trademark
2 2