Analog Inputs:
Number of analog inputs
2
Terminal number
53, 60
Voltage mode (Terminal 53)
Switch S200=OFF(U)
Current mode (Terminal 53 and 60)
Switch S200=ON(I)
Voltage level
0 -10V
Input resistance, R
i
approx. 10 kΩ
Max. voltage
20V
Current level
0/4 to 20 mA (scaleable)
Input resistance, R
i
approx. 200Ω
Max. current
30mA
Analog output:
Number of programmable analog outputs
1
Terminal number
42
Current range at analog output
0/4 - 20mA
Max. load to common at analog output
500Ω
Max. voltage at analog output
17V
Accuracy on analog output
Max. error: 0.8 % of full scale
Resolution on analog output
8bit
Control card, RS-485 serial communication:
Terminal number
68 (P,TX+, RX+), 69 (N,TX-, RX-)
Terminal number 61
Common for terminals 68 and 69
Control card, 24 V DC output:
Terminal number
12
Max. load (M1 and M2)
160mA
Max. load (M3)
30mA
Max. load (M4 and M5)
200mA
Relay output:
Programmable relay output
1
Relay 01 Terminal number
01-03 (break), 01-02(make)
Max. terminal load (AC-1)
1)
on 01-02 (NO) (Resistive load)
250V AC, 2 A
Max. terminal load (AC-15)
1)
on 01-02 (NO) (Inductive load @ cosφ 0.4)
250V AC, 0.2 A
Max. terminal load (DC-1)
1)
on 01-02 (NO) (Resistive load)
30V DC, 2 A
Max. terminal load (DC-13)
1)
on 01-02 (NO) (Inductive load)
24V DC, 0.1A
Max. terminal load (AC-1)
1)
on 01-03 (NC) (Resistive load)
250V AC, 2 A
Max. terminal load (AC-15)
1)
on 01-03 (NC) (Inductive load @ cosφ 0.4)
250V AC, 0.2A
Max. terminal load (DC-1)
1)
on 01-03 (NC) (Resistive load)
30V DC, 2 A
Min. terminal load on 01-03 (NC), 01-02 (NO)
24V DC 10 mA, 24V AC 20 mA
Environment according to EN 60664-1
overvoltage category III/pollution degree 2
1) IEC 60947 part 4 and 5
Control card, 10 V DC output:
Terminal number
50
Output voltage
10.5V ±0.5V
Max. load
25mA
NOTE
All inputs, outputs, circuits, DC supplies and relay contacts
are galvanically isolated from the supply voltage (PELV)
and other high-voltage terminals.
Quick Guide
VLT Micro Drive Quick Guide
MG.02.B6.02 - VLT
®
is a registered Danfoss trademark
17
1
1