13-40 Logic Rule Boolean 1
Array [6]
Option:
Function:
[23] Comparator 1
Use the result of comparator 1 in the
logic rule.
[24] Comparator 2
Use the result of comparator 2 in the
logic rule.
[25] Comparator 3
Use the result of comparator 3 in the
logic rule.
[26] Logic rule 0
Use the result of logic rule 0 in the
logic rule.
[27] Logic rule 1
Use the result of logic rule 1 in the
logic rule.
[28] Logic rule 2
Use the result of logic rule 2 in the
logic rule.
[29] Logic rule 3
Use the result of logic rule 3 in the
logic rule.
[30] SL Time-out 0
Use the result of timer 0 in the logic
rule.
[31] SL Time-out 1
Use the result of timer 1 in the logic
rule.
[32] SL Time-out 2
Use the result of timer 2 in the logic
rule.
[33] Digital input DI18
Use the value of DI18 in the logic rule
(High = TRUE).
[34] Digital input DI19
Use the value of DI19 in the logic rule
(High = TRUE).
[35] Digital input DI27
Use the value of DI27 in the logic rule
(High = TRUE).
[36] Digital input DI29
Use the value of DI29 in the logic rule
(High = TRUE).
[39] Start command
This logic rule is TRUE if the frequency
converter is started by any means
(either via digital input, or other).
[40] Drive stopped
This logic rule is TRUE if the frequency
converter is stopped or coasted by any
means (either via digital input, or
other).
[42] Auto Reset Trip
This logic rule is TRUE if the frequency
converter is tripped (but not trip-
locked) and an Automatic Reset is
issued.
[50] Comparator 4
Use the result of comparator 4 in the
logic rule.
[51] Comparator 5
Use the result of comparator 5 in the
logic rule.
[60] Logic rule 4
Use the result of logic rule 4 in the
logic rule.
13-40 Logic Rule Boolean 1
Array [6]
Option:
Function:
[61] Logic rule 5
Use the result of logic rule 5 in the
logic rule.
[70] SL Time-out 3
Use the result of timer 3 in the logic
rule.
[71] SL Time-out 4
Use the result of timer 4 in the logic
rule.
[72] SL Time-out 5
Use the result of timer 5 in the logic
rule.
[73] SL Time-out 6
Use the result of timer 6 in the logic
rule.
[74] SL Time-out 7
Use the result of timer 7 in the logic
rule.
[83] Broken Belt
A broken belt condition has been
detected. This function must be
enabled in
13-41 Logic Rule Operator 1
Option:
Function:
[0]
*
Disabled
[1]
AND
[2]
OR
[3]
AND NOT
[4]
OR NOT
[5]
NOT AND
[6]
NOT OR
[7]
NOT AND NOT
[8]
NOT OR NOT
13-42 Logic Rule Boolean 2
Array [6]
Option:
Function:
Select the second boolean (TRUE or
FALSE) input for the selected logic
rule.
See
for
further descriptions of choices and
their functions.
[0]
*
False
[1]
True
[2]
Running
[3]
In range
[4]
On reference
[7]
Out of current range
[8]
Below I low
[9]
Above I high
[16] Thermal warning
[17] Mains out of range
[18] Reversing
Parameters
VLT
®
HVAC Basic Drive FC 101 Programming Guide
MG18B302 - Rev. 2013-09-02
61
3
3
