Danfoss VLT DriveMotor FCP 106, Руководство по программированию

Страница: 63 / 148

5-11 Terminal 19 Digital Input
Parameter for configuring the input function on input terminal
19.
Option: Function:
[101] Sleep
5-12 Terminal 27 Digital Input
Parameter for configuring the input function on input terminal
27. When
parameter 0-03 Regional Settings is set to [0] Interna-
tional , the default value is [2] Coast inverse . When
parameter 0-03 Regional Settings is set to [1] North America , the
default value is [7] External Interlock .
Option: Function:
[0] No operation
[1] Reset
[2] Coast inverse
[3] Coast and reset inverse
[4] Quick stop inverse
[5] DC-brake inverse
[6] Stop inverse
[7] External Interlock
[8] Start
[9] Latched start
[10] Reversing
[11] Start reversing
[14] Jog
[16] Preset ref bit 0
[17] Preset ref bit 1
[18] Preset ref bit 2
[19] Freeze reference
[20] Freeze output
[21] Speed up
[22] Speed down
[23] Set-up select bit 0
[34] Ramp bit 0
[37] Fire Mode
[52] Run permissive
[53] Hand start
[54] Auto start
[60] Counter A (up)
[61] Counter A (down)
[62] Reset Counter A
[63] Counter B (up)
[64] Counter B (down)
[65] Reset Counter B
[101] Sleep
5-13 Terminal 29 Digital Input
Parameter for configuring the input function on input terminal
29.
Option: Function:
[0] No operation
[1] Reset
[2] Coast inverse
[3] Coast and reset inverse
5-13 Terminal 29 Digital Input
Parameter for configuring the input function on input terminal
29.
Option: Function:
[4] Quick stop inverse
[5] DC-brake inverse
[6] Stop inverse
[7] External Interlock
[8] Start
[9] Latched start
[10] Reversing
[11] Start reversing
[14]
*
Jog
[16] Preset ref bit 0
[17] Preset ref bit 1
[18] Preset ref bit 2
[19] Freeze reference
[20] Freeze output
[21] Speed up
[22] Speed down
[23] Set-up select bit 0
[32] Pulse input
[34] Ramp bit 0
[37] Fire Mode
[52] Run permissive
[53] Hand start
[54] Auto start
[60] Counter A (up)
[61] Counter A (down)
[62] Reset Counter A
[63] Counter B (up)
[64] Counter B (down)
[65] Reset Counter B
[101] Sleep
4.6.3 5-3* Digital Outputs
Parameters for configuring the output functions for the
output terminals.
5-30 Terminal 27 Digital Output
This parameter has the options described in chapter 4.6.3 5-3*
Digital Outputs .
Option: Function:
[0]
*
No operation
5-31 Terminal 29 Digital Output
This parameter has the options described in chapter 4.6.3 5-3*
Digital Outputs .
Option: Function:
[0]
*
No operation
Parameters Programming Guide
MG03N202 Danfoss A/S © 11/2015 All rights reserved. 61
4 4