Danfoss VLT DriveMotor FCP 106, Руководство по конструкции

Страница: 57 / 82

5 Type Code and Selection Guide
5.1 Drive Configurator
Configure a frequency converter according to the
application requirements, using the ordering number
system.
Order frequency converter motors as standard or with
internal options by using a type code string, for example:
FCM106P4K0T4C55H1FSXXANXE4N4K0150B03000
Refer to chapter 5.2 Type Code String for a detailed specifi-
cation of each character in the string. In the example
above, a motor with efficiency class IE4 and with a normal
overload load profile is included in the frequency
converter. Ordering numbers for frequency converter
motor standard variants are available in
chapter 5.3 Ordering Numbers .
To configure the correct frequency converter or frequency
converter motor for an application, and generate the type
code string, use the internet-based Drive Configurator. The
Drive Configurator automatically generates an 8-digit sales
number to be delivered to the local sales office.
Furthermore, it can produce a project list with several
products and send it to a Danfoss sales representative.
To access the Drive Configurator, go to:
www.danfoss.com/
drives .
Type Code and Selection Gui... Design Guide
MG03M202 Danfoss A/S © 06/2016 All rights reserved. 55
5 5