12-11 Link Duration
Range:
Function:
Size
related
*
[ 0 - 0 ]
Read-only. Show the duration of
the present link on each port in
dd:hh:mm:ss.
12-12 Auto Negotiation
Option:
Function:
Configure auto negotiation of
Ethernet link parameters, for each
port: ON or OFF.
[0]
Off
Link Speed
and
Link Duplex
can be
configured in
and
parameter 12-14 Link
Duplex
.
[1]
*
On
12-13 Link Speed
Force the link speed for each port in 10 Mbps or 100 Mbps. If
parameter 12-12 Auto Negotiation
is set to
[1] On
, this parameter
is read-only and shows the actual link speed. If no link is present,
[0] None
is shown.
Option:
Function:
NOTICE
In POWERLINK, this parameter
is locked to 100 Mbps.
[0]
*
None
[1]
10 Mbps
[2]
100 Mbps
12-14 Link Duplex
Force the duplex for each port to full or half duplex. If
parameter 12-12 Auto Negotiation
is set to
[1] On
, this parameter
is read-only.
Option:
Function:
NOTICE
In POWERLINK, this parameter
is locked to half duplex.
[0]
Half Duplex
[1]
Full Duplex
12-18 Supervisor MAC
Range:
Function:
0
*
[0 -
2147483647 ]
Show the MAC address of currently
active supervisor.
12-19 Supervisor IP Addr.
Range:
Function:
0
*
[0 -
2147483647 ]
Show the IP address of currently
active supervisor.
4.11.3 12-8* Other Ethernet Services
12-80 FTP Server
Enables/disables the built-in FTP server.
Option:
Function:
[0]
*
Disabled
Disable the built-in FTP server.
[1]
Enabled
Enable the built-in FTP server.
12-81 HTTP Server
Enables/disables the built-in HTTP (web) server.
Option:
Function:
[0]
*
Disabled
Disable the built-in HTTP (web)
server.
[1]
Enabled
Enable the built-in HTTP (web)
server.
12-82 SMTP Service
Enables/disables the SMTP (e-mail) service on the option.
Option:
Function:
[0]
*
Disabled
Disable the SMTP (e-mail) service
on the option.
[1]
Enabled
Enable the SMTP (e-mail) service on
the option.
12-83 SNMP Agent
Option:
Function:
[0]
Disabled
Disable the local SNMP agent.
[1]
*
Enabled
Enable the local SNMP agent.
12-84 Address Conflict Detection
Option:
Function:
[0]
Disabled
Disable the function which detects
and resolves IP address conflicts
with this device in the network.
[1]
*
Enabled
Enable the function which detects
and resolves IP address conflicts
with this device in the network.
12-85 ACD Last Conflict
Range:
Function:
0
*
[0 -
2147483647 ]
The contested IP address of the
most recent address conflict.
12-89 Transparent Socket Channel Port
Range:
Function:
Size
related
*
[ 0 - 65535 ]
Configure the TCP port number for
the transparent socket channel. This
configuration enables FC telegrams
to be sent transparently on
Ethernet via TCP. Default value is
4000, 0 means disabled.
Parameter Descriptions
Programming Guide
MG06J202
Danfoss A/S © 03/2019 All rights reserved.
113
4
4
Содержание VLT AutomationDrive FC 361
Страница 2: ......