Danfoss VLT AutomationDrive FC 360 Скачать руководство пользователя страница 3

Страница: 3 / 4

Enclosure type J5

Remove M4x50 screws in the bottom right and upper
left corners.

Illustration 1.6 Removing Fan Screws on Enclosure Type J5

Grab the centre handle an pull the fan outwards.

Unplug the fan cable

Illustration 1.7 Fan Cable Plug. Plug Location Depends on Fan

Type

1.1.4 Mounting

Connect the fan cable.

Mount the fan.

Enclosure types J1, J2 and J4: Click the fan
into place.

Enclosure types J3 and J5: Mount the fan
and fasten the screws.

Installation Instructions

Fan Replacement

MI06F102 - VLT

is a registered Danfoss trademark

Содержание VLT AutomationDrive FC 360

Страница 1: ...s Voltage V Minimum waiting time minutes 4 15 380 480 0 37 7 5 kW 11 22 kW Table 1 2 Discharge Time 1 1 3 Demounting Enclosure types J1 J2 and J4 1 Grab the centre handle on the fan and use a flat edg...

Страница 2: ...llustration 1 3 Removing Fan Screw on Enclosure Type J3 2 Press the levers on each side of the fan and pull the fan outwards Illustration 1 4 Pulling out Fan on Enclosure Type J3 3 Unplug the fan cabl...

Страница 3: ...the fan outwards 3 Unplug the fan cable Illustration 1 7 Fan Cable Plug Plug Location Depends on Fan Type 1 1 4 Mounting 1 Connect the fan cable 2 Mount the fan 2a Enclosure types J1 J2 and J4 Click t...

Страница 4: ...MI06F102 MI06F102 132R0210 Rev 2013 03 21...