Danfoss VLT AutomationDrive FC 302, Руководство по программированию, Страница: 231 / 346

23-04 Occurrence
Array [10]
Option: Function:
[31] Day 22 of month
[32] Day 23 of month
[33] Day 24 of month
[34] Day 25 of month
[35] Day 26 of month
[36] Day 27 of month
[37] Day 28 of month
[38] Day 29 of month
[39] Day 30 of month
[40] Day 31 of month
23-08 Timed Actions Mode
Used to enable and disable automatic timed actions.
Option: Function:
[0]
*
Timed Actions Auto Enable timed actions.
[1] Timed Actions
Disabled Disable timed actions, normal
operation according to control
commands.
[2] Constant On Actions Disable timed actions. Constant On
Actions activated.
[3] Constant Off Actions Disable timed actions. Constant Off
Actions activated.
23-09 Timed Actions Reactivation
Option: Function:
[0] Disabled After an update of time/condition
•
power cycling
•
setting date
•
time
•
change of summertime
•
change of Hand Auto mode
•
change of Constant ON and OFF
set-up change all activated ON actions are
overridden to OFF actions until passing the next
time for an ON action. Any OFF actions remain
unchanged.
[1]
*
Enabled After an update of time/condition On and OFF
actions are immediately set to the actual time
programming of ON and OFF actions.
See the example of a reactivation test in Illustration 3.70 .
Timed Action
ON: RUN
OFF: STOP
Power
Cycle
P23-09:
Disabled Power
Cycle
P23-09:
Disabled P23-09:
Disable
Enable
Power
Cycle
P23-09:
Enabled
Status
RUNNING
STOPPED
130BB808.10
Illustration 3.70 Reactivation Test Diagram
Parameter Descriptions Programming Guide
MG33MP02 Danfoss A/S © 10/2018 All rights reserved. 229
3 3