![background image](http://html1.mh-extra.com/html/danfoss/vlt-automationdrive-fc-301/vlt-automationdrive-fc-301_programming-manual_507840249.webp)
the parameter, for example 50% = 20 mA. If a current 4–20 mA is required at maximum output (100%), calculate the percentage
value as follows (example where required maximum output is 10 mA):
I
RANGE
mA
I
DESIRED MAX
mA × 100 %
=
20 − 4 mA
10 mA × 100 % = 160 %
e3
0b
a8
77
.1
1
[mA]
0%
20
0/4
100%
Current
Analog
output min
scale
par. 6-71
Variable for
output
example: Speed
[RPM]
Analog
output max
scale
par. 6-72
Illustration 71: Output Maximum Scale
Parameter 6-73 Terminal X45/1 Bus Control
Table 439: Parameter 6-73 Terminal X45/1 Bus Control
6-73 Terminal X45/1 Bus Control
Default value: 0%
Parameter type: Range, 0 - 100%
Setup: All setups
Conversion index: -2
Data type: N2
Change during operation: True
Holds the level of analog output 3 (terminal X45/1) if controlled by bus.
Parameter 6-74 Terminal X45/1 Output Timeout Preset
Table 440: Parameter 6-74 Terminal X45/1 Output Timeout Preset
6-74 Terminal X45/1 Output Timeout Preset
Default value: 0%
Parameter type: Range, 0 - 100%
Setup: 1 setup
Conversion index: -2
Data type: Uint16
Change during operation: True
Holds the preset level of analog output 3 (terminal X45/1). If there is a fieldbus timeout and a timeout function is selected in
param-
eter 6-70 Terminal X45/1 Output
, the output is preset to this level.
5.7.9 6-8* Analog Output 4 MCB 113
Parameters for configuring the scaling and limits for analog output 4, terminals X45/3 and X45/4. Analog outputs are current out-
puts: 0/4–20 mA. Resolution on analog output is 11 bit.
Parameter 6-80 Terminal X45/3 Output
Table 441: Parameter 6-80 Terminal X45/3 Output
6-80 Terminal X45/3 Output
Default value: [0] No operation
Parameter type: Option
Setup: All setups
Conversion index: –
Data type: Uint8
Change during operation: True
Select the function of terminal X45/3 as an analog current output.
AU275636650261en-000101 / 130R0334 | 249
Danfoss A/S © 2022.12
Parameter Descriptions
VLT AutomationDrive FC 301/302
Programming Guide