![background image](http://html1.mh-extra.com/html/danfoss/vlt-automationdrive-fc-300-series/vlt-automationdrive-fc-300-series_programming-manual_3537809025.webp)
3.2 Parameters: 0-** Operation and Display
Parameters related to the fundamental functions of the
frequency converter, function of the LCP keys and configu-
ration of the LCP display.
3.2.1 0-0* Basic Settings
0-01 Language
Option:
Function:
Defines the language to be used in the
display. The frequency converter can be
delivered with 4 different language
packages. English and German are
included in all packages. English cannot
be erased or manipulated.
[0]
*
English
Part of Language packages 1 - 4
[1]
Deutsch
Part of Language packages 1 - 4
[2]
Francais
Part of Language package 1
[3]
Dansk
Part of Language package 1
[4]
Spanish
Part of Language package 1
[5]
Italiano
Part of Language package 1
Svenska
Part of Language package 1
[7]
Nederlands
Part of Language package 1
[10] Chinese
Part of Language package 2
Suomi
Part of Language package 1
[22] English US
Part of Language package 4
Greek
Part of Language package 4
Bras.port
Part of Language package 4
Slovenian
Part of Language package 3
Korean
Part of Language package 2
Japanese
Part of Language package 2
Turkish
Part of Language package 4
Trad.Chinese
Part of Language package 2
Bulgarian
Part of Language package 3
Srpski
Part of Language package 3
Romanian
Part of Language package 3
Magyar
Part of Language package 3
Czech
Part of Language package 3
Polski
Part of Language package 4
Russian
Part of Language package 3
Thai
Part of Language package 2
0-01 Language
Option:
Function:
Bahasa Indonesia Part of Language package 2
[52] Hrvatski
Part of Language package 3
0-02 Motor Speed Unit
Option:
Function:
The display showing depends on settings in
and
0-03 Regional Settings
. The
default setting of
and
0-03 Regional Settings
depends on which region of
the world the frequency converter is supplied to, but
can be re-programmed as required.
NOTE
Changing the
Motor Speed Unit
will reset certain
parameters to their initial value. It is
recommended to select the motor speed unit
first, before modifying other parameters.
[0]
RPM Selects display of motor speed variables and
parameters (i.e. references, feedbacks and limits) in
terms of motor speed (RPM).
[1]
*
Hz
Selects display of motor speed variables and
parameters (i.e. references, feedbacks and limits) in
terms of output frequency to the motor (Hz).
NOTE
This parameter cannot be adjusted while the motor is
running.
0-03 Regional Settings
Option:
Function:
[0]
*
Interna-
tional
Activates
for setting
the motor power in kW and sets the default
value of
to 50Hz.
[1]
US
Activates
for setting
the motor power in HP and sets the default
value of
to 60Hz.
NOTE
This parameter cannot be adjusted while the motor is
running.
0-04 Operating State at Power-up (Hand)
Option:
Function:
Selects the operating mode upon
reconnection of the frequency converter to
mains voltage after power down in Hand
(local) operation mode.
[0]
Resume
Restarts the maintaining the same local
reference and the same start/stop settings
Parameter Descriptions
VLT
®
AutomationDrive Programmming Guide
24
MG33ME02 - VLT
®
is a registered Danfoss trademark
3
3
Содержание VLT AutomationDrive FC 300 Series
Страница 1: ...MAKING MODERN LIVING POSSIBLE Programming Guide VLT AutomationDrive...
Страница 210: ...www danfoss com drives MG33ME02 130R0334 MG33ME02 Rev 2012 02 20...
Страница 211: ......