Danfoss Vacon NXP Series Скачать руководство пользователя страница 117

Страница: 117 / 174

CAUTION

BURNING HAZARD FROM HOT SURFACES

The surface of the side of the AC drive FR8 is hot.

Do not touch the side of the AC drive FR8 with hands when it operates.

CAUTION

FIRE HAZARD FROM HOT SURFACES

When the AC drive FR6 operates, the rear surface of the drive is hot, and can cause fire on the surface it is installed on.

Do not install the AC drive FR6 on a surface that is not fireproof.

9.2 Commissioning the AC Drive

Context:

Follow these instructions to commission the AC drive.

Prerequisites:

Read the safety instructions in

2.2 Danger and Warnings

and

9.1 Safety Checks before Starting the Commissioning

and obey them.

Commissioning

Operating guide | VACON® NXS/NXP Air-cooled

DPD00910G

| 117

Danfoss A/S ©

2018.06

Содержание Vacon NXP Series















































































































































































Результаты поиска

Содержание Vacon NXP Series

Отзывы:

Danfoss Vacon NXP Series, Руководство по эксплуатации, Страница: 117 / 174

Результаты поиска

Содержание Vacon NXP Series

Отзывы: