manualshive.com logo in svg

Danfoss Vacon NXP Series, Руководство по эксплуатации, Страница: 11 / 174

Поделиться
Скачать
Danfoss Vacon NXP Series Скачать руководство пользователя страница 11

2 Safety

2.1 Safety Symbols

The following symbols are used in this manual:

DANGER

Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

WARNING

Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION

Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

NOTICE

Indicates a property damage message.

2.2 Danger and Warnings

DANGER

SHOCK HAZARD FROM POWER UNIT COMPONENTS

The power unit components are live when the drive is connected to mains. A contact with this voltage can lead to death or
serious injury.

-

Do not touch the components of the power unit when the drive is connected to mains. Before connecting the drive to
mains, make sure that the covers of the drive are closed.

DANGER

SHOCK HAZARD FROM TERMINALS

The motor terminals U, V, W, the brake resistor terminals, or the DC terminals are live when the drive is connected to mains, also
when the motor does not operate. A contact with this voltage can lead to death or serious injury.

-

Do not touch the motor terminals U, V, W, the brake resistor terminals, or the DC terminals when the drive is connected to
mains. Before connecting the drive to mains, make sure that the covers of the drive are closed.

Safety

Operating guide | VACON® NXS/NXP Air-cooled

DPD00910G

 | 11

Danfoss A/S © 

2018.06

Содержание Vacon NXP Series















































































































































































Отзывы:

Нет отзывов