•
•
•
10.113 (ID 355) Frequency Converter Temperature Limit Value
Location in the menu:
P2.3.21
(Local/Remote Control Application, Multi-Step Speed Control Application, PID Control Application)
P2.3.4.12
(Multi-Purpose Control Application)
P2.3.2.12
(Pump and Fan Control Application)
Use this parameter to set the limit supervision value for the temperature when activating the temperature limit supervision func-
tion.
Parameter
ID 354
supervises this temperature value.
10.114 (ID 356) Analog Supervision Signal
Location in the menu:
P2.3.4.13
(Multi-Purpose Control Application)
Use this parameter to select the analog input to monitor.
10.115 (ID 357) Analog Supervision Low Limit
Location in the menu:
P2.3.4.14
(Multi-Purpose Control Application)
Use this parameter to set the low limit for the analog input selected to be monitored.
See
10.116 (ID 358) Analog Supervision High Limit
10.116 (ID 358) Analog Supervision High Limit
Location in the menu:
P2.3.4.15
(Multi-Purpose Control Application)
Use this parameter to set the high limit for the analog input selected to be monitored.
These parameters set the low and high limits of the signal selected with parameter
ID 356
.
0
1
ID357
ID358
[s]
e
3
0
b
h
0
4
2
.1
0
A
B
C
Illustration 50: An Example of On/Off-control
A
AI, selected with parameter
ID 356
B
Time
C
RO1
In this example, the programming of parameter
ID 463
= B.1.
10.117 (ID 359) PID Controller Minimum Limit
Location in the menu:
P2.2.30
(PID Control Application)
Use this parameter to set the minimum limit for the PID controller output.
AB296635287482en-000301 / DPD00903
204 | Danfoss A/S © 2023.02
Parameter Descriptions
VACON® NX All-in-One
Application Guide
Содержание VACON NX
Страница 1: ...Application Guide VACON NX All in One drives danfoss com...
Страница 2: ......
