TP7000 RANGE
8
F
D
ES
DK
NL
I
GR
PL
LT
CZ
HR
GB
a) Press
PROG
until Event 1 fl ashes, then
press
DAY
to move from current day to
Day 1.
b) Amend the time and temperature as
follows:
i)
Use
+ and –
buttons to alter time
(press and hold to change in 10 min
increments).
ii)
Use
and
buttons to alter
temperature in 0.5°C (1°F) steps.
iii) Press
NEXT
to advance to next
Event.
iv) Repeat steps i,ii & iii above for Events
2, 3, 4, 5 & 6.
c) When all 6 events are correct, press
DAY
to programme events for Day 2.
1.81 Programming in 7-day mode
(separate programmes for each day of the week)
1
1
1 2 3 4 5
1.8 Before you change the preset programmes
Your installer will have set your unit to operate in either
7-day mode
or
5/2 day mode
. To tell which mode your unit is set press
PROG
until Event 1 fl ashes in the display.
This unit is in
7-day
mode and you can programme
diff erent settings for each day of the week
(see page
8-9
).
This unit is in
5/2 day
mode and you can enter one of
set of programmes for weekdays and another set for
weekends (
see page 91
).