Danfoss Termix VMTD-F-B, Руководство по установке, Страница: 9 / 20

Installation Guide Termix VMTD-F-B
5.2 Schematic diagram
DHW
CWM
DCW
DH
Supply
HE
Supply
DH
Return
HE
Return
Your substation might look different than the schematic diagram shown.
Schematic description
B
Heat exchanger, DHW
31
Differential pressure controller
7
Thermostatic valve, DHW
41A Fitting piece, cold water mains
9 Strainer 41B Fitting piece, energy meter
14 Sensor pocket, energy meter
DHW: Domestic Hot Water
CWM:
Cold Water Mains
DCW:
Domestic Cold Water
DH Supply: District Heating Supply
DH Return: District Heating Return
HE Supply: Heating Supply
HE Return: Heating Return
5.2.1 Technical parameters
Technical parameters
Nominal pressure: PN 10 (PN 16 versions are available on enquiry)
Max. DH supply temperature: 120 °C
Min. DCW static pressure: 0.5 bar
Brazing material (HEX): Copper
Heat exchangers test pressure: 30 bar
Sound level: ≤ 55 dB
Danfoss District Energy
VI.CW.C3.02 / LUK40110 DEN-GT 9