Installation Guide
Termix One-B
2.0 Functional description
Instantaneous water heater with heat exchanger and
thermostatic control. Designed for wallmounting.
Application
The Termix One is an instantaneous water heater featuring superb
heat extraction and high performance. The Termix One is suitable
for flats, single-family houses as well as for small apartment
buildings with up to 10 apartments. The water heater is available in
three sizes, either for 1 apartment, for 1
‑
4 apartments or for 5 up
to 10 apartments. The Termix One is applicable for decentralized
heating systems – as well as for district heating networks with
summer operation at low temperatures or changes in differential
pressure. The Termix One heat exchanger cools out the district
heating water very efficiently, thereby creating a very good
operation economy.
Domestic hot water (DHW)
The domestic hot water is prepared in the heat exchanger and
the temperature is regulated with a thermostatic control valve.
The patented sensor accelerator accelerates the closing of the
Danfoss AVTB valve and protects the heat exchanger against
overheating and lime scale formation. The sensor accelerator and
AVTB valve also works as a bypass keeping the house supply line
warm. This shortens the waiting periods during summer when the
heating system is in reduced operation. The sensor accelerator
helps to ensure a stable hot water temperature by varying loads,
flow temperatures and differential pressure without the need for
readjusting the valve. There is no additional pressure loss on the
secondary side of the DHW heat exchanger with a thermostatic
control. Therefore this type of regulation can be used by low
pressure on the in the cold water mains.
2
DEN-GT
VI.CW.J3.02 / LUK38000
Danfoss Heating
