![background image](http://html.mh-extra.com/html/danfoss/sono-3500-ct/sono-3500-ct_operating-instructions-manual_508247013.webp)
Commissioning
6.4 Commissioning via PDM
11
SONO 3500 CT
Operating Instructions, 07/2019, VI.SH.P2.02
6.4
Commissioning via PDM
SIMATIC PDM (Process Device Manager) is a software package for configuring,
parameterizing, commissioning, and maintaining field devices (for example transducers).
Among other features, SIMATIC PDM contains a simple process for monitoring process
values, interrupts and status/diagnosis signals of a field device.
Note
For instructions on installation and operation of SIMATIC PDM, refer to the SIMATIC PDM
Getting Started (included in the documentation package that comes with PDM).
Note
Minimum PDM version required is SIMATIC PDM V6.0 + SP5
Note
Default password
Any data change in PDM requires a password. The default password is 1000. For further
information, see Password-protected data (Page 50).
Note
For type-approved and verified SONO 3500 CT flowmeter the settings are HW key protected
and can only be read, but not changed via PDM. This HW key is protected via the verification
sealing. The verification sealing can only be broken by the user with the acceptance of the
local authorities.
In the following it is described how the device is commissioned using SIMATC PDM.
The commissioning is divided into the following steps:
1. Installing and connecting the IrDA interface adapter (Page 40)
2. Installing EDD files (Page 41)
3. Adding the device to the network (Page 42)
4. Configuring the device (Page 42)
5. Optimizing the system (Page 43)
6. Checking the operation readiness (Page 46)
6.4.1
Installing and connecting the IrDA interface adapter
Note
IrDA driver installation
For installation of the IrDA driver, refer to the instructions delivered with the adapter.
Содержание SONO 3500 CT
