Danfoss Secop 105N9502, Руководство пользователя

Страница: 4 / 20

4 FRCC.ES.011.A1.02
M
ANUAL
I
NTRODUCTION
1. The Bluetooth® gateway is battery driven. It is not fully charged upon new delivery.
Charging the gateway may take up to 2 hours. The gateway may be used while charging.
2. When fully charged the gateway will run continuously 8 – 12 hours without power supply.
3. The maximum range is ~10 meters.
4. The Bluetooth® gateway may be permanently installed in an application.
In permanent applications the charger enclosed upon delivery is used as a power supply.
5. If no serial communication occurs over a period of 60 seconds then the Bluetooth® gateway will
shut down to conserve the battery. If the fi nding and pairing of the Bluetooth® device takes more
than 60 seconds then the gateway will shut down. In the event that the gateway shuts down in the
middle of an operation simply turn it on again and repeat the operation.
6. Requirements for Bluetooth® adapters:
- PC or adapter has to be a class 1 or class 2 Bluetooth® transmitter. The Secop Bluetooth® gateway is
a class 2 transmitter.
- Dedicated software has to support Bluetooth® serial ports.
Bluetooth® RS485 gateway with male DSUB-9 plug connector
- USB power supply
- DSUB-9 / RJ45 adaptor
Important to know
Contents of the package
The Secop Bluetooth® gateway is used in the connection between a controller and a computer when
running Tool4Cool® software.
The gateway is equipped with a high-performance rechargeable battery, so an external power source is
not required. This makes the gateway particularly suitable in mobile applications.
Under normal circumstances no driver installation is required and the gateway functions fully
independently of the operating system platform in use. However if problems arise, please refer to
section 8.
Please read the instructions in this handbook before using the gateway for the fi rst time.
General Description