8
Commissioning (RF only)
Step 1
RET B-RF
Remove dial, press & hold
LEARN
button for 3 seconds
(located under setting dial).
Do not replace the setting dial yet
NOTE: Thermostat now transmits
signal continuously for 5 mins
Step 2 RX1
Press and hold buttons
PROG
and
CH1
until
green
light
fl
ashes.
Step 3 RX2/RX3
For RX2 or RX3 repeat steps 1 and 2 for each
thermostat and channel, leaving at least 5 mins
between the commissioning of each thermostat.
Step 4
RET B-RF
Replace thermostat setting dial.
LEARN
GB - Installation Instructions
