Joystick buttons
Buttons activation force
5 N ±10%
Buttons overload force
100 N for 1000 activations
Joystick base
Lever deflection angle
±30°, tolerance: ±3°
Return to center tolerance
±1°
Environmental characteristics
The system integrator must ensure an appropriate installation position.
JS1-H Steer by Wire must not be installed in environments where the ambient temperature exceeds 85°C.
In case of uncertainty, contact a Danfoss representative for further information.
EMC
Radiated EMI
CISPR 25:2008, DIN EN 55025, class 3 (except GPS L1 & GLONASS L2 are
no compliance)
Conducted EMI
CISPR 25:2008, DIN EN 55025, class 4 (exception FM band: class 3)
Radiated EMS
ISO 11452-2:2004, 100 V/m
Conducted EMS
ISO 11452-4:2011, 200 mA
Automotive transient pulses 1, 2a, 2b, 3a &
3b
ISO 7637-2:2012
Automotive starting profile
ISO 16750-2:2012 (Note: Us6=5.5V)
Automotive load dump protection
ISO 16750-2:2012 (12V system) (Only Force Feedback & Ext. Relay)
ESD Contact 8 kV, Air 15 kV
ISO 61000-4-2:2009 & ISO 10605:1994
Temperature
Operating Temperature w/o force feedback function
-20°C to +70°C
Operating Temperature with force feedback function
-20°C to +60°C
Storage temperature
-40°C to +85°C
Environmental influences
Pressure
Not applicable
Chemical Resistance
ISO 16750-5:2010
Vibration Sinus Random
ISO 16750-3:2012, 10 - 2000 Hz/21.3m/s^2 RMS
Vibration Shock
IEC 60068-2-27:2008, 30g/11ms
Humidity
IP54
User and Safety Manual
PLUS+1® JS1-H Steer by Wire
Steer by Wire Joystick
10 |
©
Danfoss | December 2022
AX436683569858en-000101