![background image](http://html2.mh-extra.com/html/danfoss/pah-series/pah-series_disassembling-and-assembling-instructions_3745890003.webp)
Service guide | Disassembling and assembling PAH 10-12.5, PAHT 10-12.5 and PAHT G 10-12.5
3
180R9095 | 521B0986 0 | DKCFN.PI.010.NA4.02| 06.2017
1. Disassembling the
pump
2.
Remove the parallel key and unscrew the
front cover.
1. Tools required for dismantling.
3.
Dismantle the front cover using a vice.
4.
Remove the shaft seal using two
screw drivers.
Caution: Avoid scratching the sealing
surface on the shaft.
5. Remove the two small O-rings from the
flange. Remove the seal from the front
cover using a screwdriver.
6. Unscrew the four screws for the housing.