Instruction
Disassembling and assembling PAH 2-6.3, PAHT 2-6.3 and PAHT G 2-6.3
15
180R9094 / 521B0985 / DKCFN.PI.011.N4.02 / 09.2013
17. Tighten the screws to a torque of 13 Nm.
18. Mount the two O-rings in the flange and
the O -ring on the front cover.
19. Wet the shaft seal with water and mount it
in the front cover. Ensure that it is pressed
to the bottom.
20. Mount the washer with the edge pointing
upwards.
21. Mount the spring.
22. Fit the hollow bush onto the shaft.
