2
521B0881 DKCFN.PI.020.F1.02
3. General warranty issues
Component warranty is provided through the system manufacturer. All
questions concerning warranty must be made with the system Original
Equipment Manufacturer. Danfoss will not honour any warranty claims
made directly to Danfoss from the end-user.
Danfoss will furthermore not accept warranty claims on components
having operated outside the general and specific performance specifi-
cations and guidelines.
Spare parts and components are available through the system provider.
5. Safety
The Nessie Plug&Spray
TM
unit is capable of generating very high pres-
sure that can be harmful to human beings. It is recommended to wear
appropriate personal protection equipment when commissioning and
servicing the system.
6. System design
The Plug&Spray
TM
units are designed for humidification and adiabatic
cooling with high-pressure atomization. The units come in a constant
speed version with IEC or Nema electric motor as well as in a version
with constant pressure regulation using a Danfoss FCM 300 variable
speed drive motor.
The Plug&Spray
TM
units are available with 6 different pump sizes (see
technical data) to match the required flow demand. The motor power
is dimensioned to provide design flow at a system pressure of max. 100
bar or 1450 psi.
The Nessie high-pressure axial-piston pumps provide excellent pres-
sure stability at high efficiency and low noise level. Accumulators are
superfluous. The Plug&Spray
TM
units comprise all necessary compo-
nents to ensure the best possible performance, maximum service life
with maximum protection of the pump. The units are very compact
and require very little space and are suitable for both wall and floor
mounting.
4. Identification
The Plug&Spray
TM
unit carries a nameplate sticker on the mounting
plate indicating type and serial number of the unit. The pump carries a
nameplate sticker too.
Please have all serial numbers and code numbers handy for service
claims.
MADE IN DENMAK
