1
MCW100C, MCW100E
Time Proportional Rotary Position Controller
DESCRIPTION
The MCW100C,E Time Proportional Rotary Position Controller provides
automatic grade or steering control of paving, trenching and curbing ma-
chines. The Controller uses a wand follower to sense the grade level or
steering command from a stringline or flat surface.
Two modules are housed in the case of the Controller. The grade sensing
module electromagnetically measures the machine's deviation from a grade
reference. The amplifier module receives the signal from the sensor module
and produces a voltage output to drive solenoid valves which, on a typical
paving machine, operate lift cylinders. Within the amplifier's proportional
band, the percent of time the output is on is proportional to the grade error. The
MCW100C,E may be used together with the MCW101 Time Proportional
Level Controller to control both parameters simultaneously.
FEATURES
•
May be mounted on either side of machine
•
Adjustable tracking force
•
Dual UP/DOWN lamps show deviation from setpoint in
RUN and STANDBY modes
•
Adjustable deadband varies sensitivity
•
Run/Standby switch permits operator to switch to
manual control
•
Flexible joint on follower prevents breakage
•
Rugged aluminum housing
•
12 Vdc or 24 Vdc supply voltage
•
Reverse polarity and short circuit protected
•
Moisture and corrosion resistant
•
Withstands vibration and shock
© Copyright 2001, Danfoss (US) Company.
All rights reserved. Contents subject to change.
ORDERING INFORMATION
ACCESSORIES
1.
STEERING FOLLOWER
Straight tubular follower, 16 inches long overall with
breakaway joint. For steering only. Part number
KG07002.
2.
RIGHT ANGLE GRADE FOLLOWER
With breakaway joint. For grade applications only. Fol-
lows a stringline. Also used with skate assembly, or
skate and ski assembly for following hard reference
surface. Part number KG04003.
3.
RIGHT ANGLE GRADE FOLLOWER LESS SENSING
ARM
For grade applications utilizing the skate and/or skate
and ski assemblies. Same as Part number KG04003,
above, but without the sensing arm and breakaway joint.
Part number K09274.
4.
SKATE ASSEMBLY
For grade applications. Use with right angle grade fol-
lower (Part number K09274) on hard reference surface
Part number KG06001.
5.
SKI ASSEMBLY
For grade applications. Used with right angle grade
follower (Part number K09274), and skate assembly
(Part number KG06001) on hard reference surface. Part
number KG02001.
6.
CABLE ASSEMBLY
KW01015 two-foot coiled cable that extends to ten feet
(3 meters). Has right angle connector on one end
and straight connector on the other end to make
connections between the MCW100C,E and Bendix
Type No. MS3102A18-1P plug. (Part number K03989).
SERVICE PARTS
1.
AMPLIFIER MODULE
Removable modular amplifier can be exchanged with
other voltage compatible grade controllers:
Part Number K02910 (12 volt, MCW100C)
K02911 (24 volt, MCW100C)
K10654 (12 volt, MCW100E)
K10655 (24 volt, MCW100E)
2.
K00702 Lens
3.
K00706 Lamp (12 volt models)
K00707 Lamp (24 volt models)
4.
K00665 RUN/STANDBY Switch
BLN-95-9013-1
Issued: March 1995