1.1.2 Ordering Code Numbers
Standard version code no: 130B1143
Coated version code no: 130B1243
1.2 Mounting Guidelines
1.2.1 Mounting of Option Modules in Slot B
The power to the frequency converter must be disconnected.
For A2, A3 and B3 enclosures:
•
Remove the (Local Control Panel), the terminal cover, and the frame from the frequency converter.
•
Fit the MCB10x option card into slot B.
•
Connect the control cables and relieve the cable by the enclosed cable strips.
Remove the knock out in the extended frame delivered in the option set, so that the option will fit under the extended frame.
•
Fit the extended frame and terminal cover.
•
Fit the or blind cover in the extended frame.
•
Connect power to the frequency converter.
•
Set up the input/output functions in the corresponding parameters, as mentioned in this document.
For A5, B1, B2, B4, C1, C2, C3, C4, D, E and F enclosures:
•
Remove the and the cradle
•
Fit the MCB10x option card into slot B
•
Connect the control cables and relieve the cable by the enclosed cable strips
•
Fit the cradle
•
Fit the
MCB109 Instruction
1 Analog I/O Option MCB109
MI.38.B2.02 - VLT
®
is a registered Danfoss trademark
5
1
