![background image](http://html1.mh-extra.com/html/danfoss/lx205t/lx205t_user-manual_3683126054.webp)
PaGE 54
© 2015 OJ Electronics A/S
10.4.4 Sensor Type 1/2
This option allows you to choose the type of floor sensor used with the thermostat.
You can thus choose to use an existing sensor with the thermostat, e.g. in
renovation projects.
Choose the sensor actually used from the list. The sensor supplied with the
thermostat is an OJ sensor listed as: “
factory
”.
• Default 10 kΩ (this is the sensor supplied with the thermostat)
• Sensor 12 kΩ
• Custom
1. Tap the “
menu
” button on the home screen.
2. Then tap the “
Installer settings
” button to access the various installer settings.
3. Tap the “
sensor Type
” button.
4. Tap the type of floor sensor actually used.
• Default 10 kΩ (this is the sensor supplied with the thermostat)
• Sensor 12 kΩ (OJ sensor)
• Custom
5. Confirm your choice with “
√
” or discard it with “
x
”.
6. If “
custom
” is chosen, you must provide resistance values for the sensor
concerned at four given temperatures. Ask the supplier of your sensor for these
values.
Tap the “
arrow Up
” or “
arrow down
” to set the resistance for the various
temperatures.
1
2
3
4
5
6
1
>
<
Contents