Danfoss Ikompact, Руководство пользователя

Страница: 7 / 12

Ikompact start up
Use the information below to properly turn the transmitter ON (OPERATION mode).
1. Place the EEPROM and the charged alkaline batteries.
2. Optional: If the transmitter has the STOP button, press and pull it out [1].
[2] [3]
[1]
The status LED [2] will blink blue until the Stand-by mode is reached and then will turn to a constant
blue [3].
3. If the transmitter does not have the STOP button, press the start button.
RX
The status LED will blink green until the transmitter is linked with the receiver.
User Manual
Ikompact transmitter
Technical description
© Danfoss | February 2019 BC293071182708en-000101 | 7