background image

BC70K and BT11K specifications

BC70K battery charger

Specification

Value

AC power supply

110 – 230 V, 50/60 Hz, ± 10%, automatic switching

DC power supply, nominal

12 – 24 V

BT11K battery

Specification

Value

Voltage

3.7 V

Capacity

1130 mAh Li-Ion

Charging temperature

0°C to 45°C

Discharge temperature

-20°C to 60°C

Charging mode

Fast (<2.5 h) and intelligent

Weight

23 g

BC70K Battery Charger Set-up

The battery charger has two charging compartments that can simultaneously charge two BT11K

batteries. Use the information below to set up the BC70K battery charger.

1. Connect the charger to a power source using the cable provided.

The red LED will switch on if the charger is properly connected.

2. Place the batteries in the charger.
3. Optional: If charging two batteries, wait at least five seconds before inserting the second battery into

the compartment.

W

Warning

Possible damage to battery.

Be sure to charge batteries in environments with temperatures over 0°C.

BC70K Charger LEDs Status

The BC70K charger has a LED for each compartment (BAT 1 and BAT 2) and a common indicator

(POWER).

LED color / frequency

Description

Green LED / pulsing (BAT 1, BAT 2)

The battery is being charged

Green LED / continuous (BAT 1, BAT 2)

The battery is completely charged

Red LED / pulsing or continuous (BAT 1, BAT 2)

The battery charger fault

Red LED / continuous (POWER)

The charger is properly connected to power source

User Manual

Ikargo1 Transmitter

Charger and battery

 

©

 Danfoss | February 2021

BC295377198224en-000102 | 9

Содержание Ikargo1












Отзывы: