Danfoss GX Series, Руководство по установке

Страница: 11 / 28


The cables are normally covered by 2 inches of concrete. A thicker surface may be required
depending on the pour and application.

Make sure that the free cable is fastened at intervals of minimum 3’ (45 cm), as the
concrete might move the cable when it is poured.

The concrete mixture must not contain sharp stones as these may damage the cable.

The concrete should be allowed to set for 30 days before the heating cables are turned on.

It is not recommended for the GX mat or cable to cross an expansion joint.
Concrete Installation (continued)
10
CONCRETE
CRUSHED STONE
AND/OR INSULATION
GROUND
GX HEATING MAT/CABLE
Copyright 20
17
Danfoss TEL:
1-888-326-3677
. FAX:
416-352-5981
VIAPF222 05/17
Copyright 20
17
Danfoss
TEL:
1-888-326-3677
. FAX:
416-352-5981
VIAPF222 05/17