(13)
Return stroke setting
The machine requires an electrical connection and a compressed air
connection. The pressure of the compressed air can be adjusted at
the compressed air maintenance unit (5).
The bending pins (1) prevent the cutting knife from getting jammed by
the work piece and enhance the cutting performance. Once the bend-
ing pins (1) are positioned according to the hose diameter, the work
piece is placed onto the cutting plate (8) between the bending pins (1)
and hose feed (12). The knife protection (11) prevents the operator
from unintentionally reaching into the cutting knife.
Once the protective cover (2) is closed, the machine is switched on at
the main switch (9), which starts the motor (7) and drives the cutting
knife. To perform the cutting procedure, the foot pedal (6) is pressed,
which moves the work piece towards the cutting knife via the pneu-
matically driven hose feed (12). When the foot pedal (6) is released,
the hose feed (12) moves back into the starting position.
The control valve for feed speed (10) can be used to adjust the feed
speed gradually according to the respective work pieces. The se-
lected speed depends on the hose design.
The return stroke setting (13) can be used to gradually adjust the dis-
tance the hose feed (12) moves back towards the starting position. In
this way, the return stroke path can be adjusted according to the re-
spective diameter of the work piece.
3.2 Accessories
The machine may be fitted with accessories. A list of the available ac-
cessories is included in the Annex, Section "Accessories".
Содержание ET9650
