Danfoss ET6300, Руководство оператора

Страница: 32 / 44

6 Maintenance
Regular maintenance will ensure the continuous operation reliability
of the machine/unit.
6.1 What you have to observe
This section describes activities to be performed by you as the opera-
tor at regular intervals to ensure smooth operation of the ma-
chine/unit.
•
Maintenance work may only be performed by qualified mainte-
nance staff (fitter).
•
Repair work on the machine/unit or components may only be
performed by appropriately qualified expert staff or UNIFLEX ex-
perts!
•
Welding, flame-cutting and grinding work on and in the ma-
chine/unit and its environment must be approved in advance.
There is a risk of fire. The machine/unit must be cleaned from
dust and inflammable substances. Adequate ventilation must be
ensured.
6.2 Maintenance schedule
If not specified otherwise, inspections listed in the maintenance
schedule are visual inspection. Replace defective parts immediately.
If you work in 2 shifts, the check frequency has to be doubled. If you
work in 3 shifts, you proceed as with 2-shift operation.
Record maintenance work performed in the maintenance log.
Maintenance item
W
ee
kl
y
M
on
th
ly
E
ve
ry
6
m
on
th
s
N
um
be
r
of
ye
ar
s
Machine
Machine: Check for damage and wear. X
Retaining bolt: Check for damage. X