2.4.2 Emergency-stop button
The machine is fitted with an emergency-stop button on the control
panel.
Immediately activate the emergency-stop button (1) in cases of emer-
gency.
Remedy the cause of the emergency stop first before unlocking the
emergency-stop button.
Do not pull the emergency-stop button for unlocking it, but release it
by rotating it.
2.4.3 Protection equipment
Due to the variety of customer-specific workpieces, UNIFLEX is not
capable of supplying additional standard protection equipment to-
gether with the machine for the prevention of potential residual risks
imposed by the machine.
The necessity of additional, workpiece-specific protection equipment
may for instance arise for angled workpiece geometries needing a
large opening for being inserted into the forming machine. The pres-
sure joining of insulators, structural steel and steel ropes, too, may re-
quire special safeguards.
The owner has to consider the need for adapted protection equip-
ment before commissioning. If such need exists, the relevant protec-
tion equipment has to be mounted before commissioning of the ma-
chine.
Содержание ET5020
