Danfoss EM-PMI240, Руководство пользователя

Страница: 27 / 59

Risk of electric shock when the connection box is open. When you work with power connections make sure that electricity
is disconnected and rotor rotation is prevented.
Risk of electric shock. When you work with power connections make sure that electricity is disconnected and
rotor rotation is prevented.
Magnetic and electromagnetic elds generated near the current-carrying conductors and permanent magnets in electric
machines represent a health danger to persons with heart pacemakers, metal implants and hearing aids. Persons with a
heart pacemaker, metal implants or hearing aids must consult a doctor before they enter the following areas:
Areas in which electric equipment and parts are operated.
Areas in which electric equipment with permanent magnets are stored, mounted, operated or repaired.
Risk of electric shock when working with the electric machine. Use isolated electric tools.
Only trained and quali ed personnel familiar with the relevant safety requirements can work with the electric machine.
Use correct personal protective equipment when you are near the electric machine.
Read the instructions in this manual before you install the electric machine.
Required tools
Following tools are required to install the electric machine:
Grease pump.
Ratchet torque wrench.
Hex head wrench kit with different metric sizes.
Socket wrench kit with different metric sizes.
Cable skinning knife.
Lifting slings with sufficient rated capacity.
Lifting eyes. Size according to machine type. See Chapter
Lifting .
EM-PMI240
6. Installation
26 |
©
Danfoss | Produced By: Danfoss Power Solutions | September 2020
| BC355256345493en-000103