4
Instructions
RI.8B.T3.02
©
Danfoss
12/2002
EKC programming tool
RC-ET
Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to
products already on order provided that such alternations can be made without subsequential changes being necessary in specifications already agreed.
All trademarks in this material are property of the respecitve companies. Danfoss and Danfoss logotype are trademarks of Danfoss A/S. All rights reserved.
Overview
EKC101 and EKC201/301 programming software
EKC101
Create setting file
EKC2/3/4xx
Create setting file
1/
',',
'2'2',
56
'2
'2
21
$.$$
',
35,17(5
56
LON
'$1%866
',
',
$.$
AKA243A – 084B2265 (IC12 and
IC13 must be exchanged with new IC’s
supplied with termination module)
PC software for creating setting files for
EKC2/3/4xx (AKM) –
084B4012 (1 license) / 084B4016 (5
license)
PC software for programming EKC’s –
0847701 (1 license) / 084B7702 (5 license)
Termination module – 084B7703/4/5*
Fixture and PC-cable for
termination – 084B7706*
3URJUDPPLQJWDUJHW (.&[[
3URJUDPPLQJ
WDUJHW(.&[[
PC software for creating
EKC1xx setting files -
included with PC software
for programming EKC’s
EKC201C EKC2xx
EKC3/4/5xx
* Fixture/termination module includes power supply for EKC operating with 12/24V a.c.
Power for EKC’s operating with other supply voltages is not supplied via programming tool.