Danfoss ECtemp 850 IV, Инструкция по установке, Страница: 24 / 40

Installation instruction ECtemp 850 IV
08097083 / VIMHE202 24 | © Danfoss | 2019.07
Replacing a malfunctioning sensor
From the installer menu select Change system. The
system is searching for connected sensors.
CHECKING SYSTEM
<-------->
The user selects the passive sensor, which should be
replaced with a new one.
REPLACE SENSOR:
SENSOR1 03FB2F
Press to loop through the found passive
sensors or to cancel replace sensor.
REPLACE SENSOR:
SENSOR2 03FC24
Press when the correct passive sensor or
“Cancel replace sensor?” is selected.
CANCEL REPLACE
SENSOR?
If the user selected a passive sensor to replace, the user
should now select the new sensor.
ADD SENSOR:
ID: 03ABC1
Press to loop through the found new sensors
or to cancel replace sensor.
ADD SENSOR:
ID: 03DEF1
Press when the correct new sensor to add
is found or “Cancel replace sensor?” is selected.
CANCEL REPLACE
SENSOR?
If the user selected a new sensor to add, the replacing
of the sensors is performed.
SENSOR REPLACED!
Add an extra sensor
From the installer menu select Change system.
The system is searching for connected sensors.
CHECKING SYSTEM
<-------->
Press to loop through the found passive
sensors or to cancel replace sensor.
ADD SENSOR:
ID: 03ABC1
Press when the correct new sensor to add
is found or “Cancel add sensor?” is selected.
CANCEL ADD
SENSOR?
If the user selected a new sensor to add, the sensor
is added.
SENSOR ADDED!