Danfoss ECtemp 530
Installation Guide
10
3. Mount and reassemble the thermostat.
• Fasten the thermostat to a socket or an exterior
wall box by driving the screws through the holes in
each side of the thermostat.
• Install the frame and front cover in the reverse
order of disassembly.
4. Turn on the power supply.
3
Settings
How to change the minimum and maximum floor
temperatures
1. Remove the adjust-
ment button.
2. Move the pins to the
desired positions.
3. Put the adjustment
button back in place.
devireg™550
3
5
6
2
4
20
30
40
50
Note:
Please be aware of the following:
• The floor temperature is measured where the floor
sensor is placed.
• The temperature of the bottom of a wooden floor can
be up to 10 degrees higher than the top.
