Danfoss ECpipeheat 10 V3, Руководство по установке

Страница: 12 / 60

Installation Guide Ready-made self-limiting cable ECpipeheat 10 V3
08091499 / AN40004190359601-010101 12 | © Danfoss | 2022.01
9 Warranty
A 5-year product warranty is valid for:
• self-limiting cables: ECpipeheat 10 V3.
Should you, against all expectations, experience a problem
with your Danfoss product, you will find that Danfoss offers
Danfoss warranty valid from the date of purchase that was
no later than 2 years from production date on the following
conditions: During the warranty period Danfoss shall offer
a new comparable product or repair the product if the
product is found to be faulty by reason of defective design,
materials or workmanship. The repair or replacement.
The decision to either repair or replace will be solely at the
discretion of Danfoss. Danfoss shall not be liable for any
consequential or incidental damages including, but not
limited to, damages to property or extra utility expenses.
No extension of the warranty period following repairs
undertaken is granted.
The warranty shall be valid only if the WARRANTY
CERTIFICATE is completed correctly and in accordance
with the instructions, the fault is submitted to the installer
or the seller without undue delay and proof of purchase
is provided. Please note that the WARRANTY CERTIFICATE
must be filled in, stamped and signed by the authorized
installer performing the installation (Installation date
must be indicated). After the installation is performed,
store and keep the WARRANTY CERTIFICATE and purchase
documents (invoice, receipt or similar) during the whole
warranty period.
Danfoss warranty shall not cover any damage caused
by incorrect conditions of use, incorrect installation or
if installation has been carried out by non-authorized
electricians. All work will be invoiced in full if Danfoss is
required to inspect or repair faults that have arisen as a result
of any of the above. The Danfoss warranty shall not extend
to products which have not been paid in full. Danfoss will,
at all times, provide a rapid and effective response to all
complaints and inquiries from our customers.
The warranty explicitly excludes all claims
exceeding the above conditions.
For full warranty text visit
www.danfoss.com .
WARRANTY CERTIFICATE
The Danfoss warranty is granted to:
The insulation resistance shall be measured by means of a DC voltage of at least 500 V for one minute.
The measured value shall be no less than 50 MΩ.
Address Stamp
Purchase date
Serial number of the product
Product Art. No.
Installation Date
& Signature Insulation [MΩ]
Connection Date
& Signature Insulation [MΩ]