background image

16 06/2015 

VIJPD102 

Danfoss Heating Solutions

User Guide 

 

 

eco Intelligent Radiator Thermostat

4. Temperature and programme settings 

4.1   Setting the comfort temperature

1.

2.

If the display is off, press  . 

Use the 

 buttons to raise or lower the comfort 

temperature (default temperature 21 ° C).  eco 

will maintain the new comfort temperature 

until the next setback or comfort period.

If the temperature is changed during a setback 

period (default 17 ° C), the new temperature 

will only be valid for this setback period.

For a permanent change of the setback tem-

perature, see chapter 4.3.

3.

4.

20 cm

If the comfort temperature is set at its lowest, 

the MIN and temperature show, indicating the 

minimum constant temperature.

eco is measuring the temperature with two 

built-in sensors - one behind the display and 

one near the valve.

Based on both readings the room tempera-

ture is calculated for an area approx. 20 cm in 

front of the display. This allows eco to control 

the actual room temperature very accurately.

Be aware that sources of cold or heat, e.g. 

fireplace, direct sun or draft, might affect the 

function of eco.

Note! If the set temperature is raised more than 1 °C eco will boost the radiator heat to reach the new 

temperature faster. You can feel the valve and radiator are getting warmer.

Minor temperature changes will not evoke a heat boost, and so the changes are made without any 

immediate indication.

Содержание Eco





























Отзывы: