Danfoss Link
General system information
VASUA202
link.danfoss.com
I want to adjust the temperature in one room
All rooms that are part of the network can be
adjusted centrally using the Danfoss Link™
panel.
You can also set the temperature using the
actual room device, i.e. the
living connect
® ther-
mostat on the radiator, or the Danfoss Link™ RS
if you have hydronic floor heating.
Please note: If you have a Danfoss Link™ RS in combination
with a living connect® thermostat in the same room,
the desired room temperature is set using only the
room sensor.
^
^
21,5
^
^
21,5
?
?
?
22,2˚
22,0˚
Start
House control
House control
Heating control
Room temperature
Customize Room
Select
House control
Select
Heating control
and
then the room
Here you can set the
desired
temperature
If you have a Danfoss Link™
RS, you can see the measured
room temperature here
Please note: Be aware that hydronic floor heating is a
relatively slow-acting heat source. It may
take as long as 8 hours for the desired room
temperature to be reached.
If you have a radiator, you should be aware
that the temperature you set is reached
locally, in the area in which the radiator
is installed
or
where the room sensor is
mounted
. Thus, minor adjustments may be
needed.
With the living connect®
thermostat, you can set the
desired room temperature
locally using the thermostat.
If you have two thermostats
in the same room, they will
synchronise automatically.
The Danfoss Link™ RS (stan-
dard with floor heating sys-
tems, extra accessory for ra-
diators with living connect®).
You can set the temperature
locally using the room sensor.