5
1. The clamp on sensor should
be mounted onto the
cylinder wall at a height
equivalent to ½ the height
of the cylinder. Care should
be taken to remove any
insulation material from
the cylinder and to ensure
that the copper surface
of the cylinder is clean.
See diagram opposite for
details.
This product should only be installed by a qualifi ed
electrician or competent heating installer and should be
in accordance with the current edition of the IEEE wiring
regulations.
1/2 cylinder
height
!
T
hermosta
t installa
tion
Installation - Thermostat
For latest prices and delivery to your door visit MyTub Ltd - 0845 303 8383 - www.mytub.co.uk - [email protected]
