background image

 D 

 GB

 F

 I

 TR

8 | AQ451838788471en-000201

© Danfoss | Climate Solutions | 2023.07

Max. permissible operating pressure (g) high-pressure side (HP): 

28 bar

3

|

 Areas of application

 ATTENTION!     Compressor operation is possible within the operating limits. 

These can be found in Bock compressor selection tool (VAP)
under vap.bock.de. Observe the information given there.

      

  -  Max. permissible discharge end temperature: 140°C

      

  - Permissible ambient temperature: (-20°C) - (+100°C) 

      

  -  Max. permissible switching frequency: 12 x /h

      

  - A minimum running time of 2 min. at equilibrium (continuous 

 

     

    operation) must be achieved.

      

  Avoid continuous operation near the threshold. Should the  

     

  compressor happen to be used near the thresholds, we  

     

  recommend the use of a thermal protection thermostat  

     

  (Accessories, Chap. 7).

      

  When operating in the vacuum range, there is a danger of air  

     

  entering on the suction side. This can cause chemical reactions,  

     

  a pressure rise in the condenser and an elevated compressed- 

     

  gas temperature. Prevent the ingress of air at all costs!

  The compressors are factory-filled with the following oil type:

     - for R134a, R404A/R507, R407C 

BOCK

 lub  E55 

   - for R22 

BOCK

 lub  A46 

Compressors with ester oil charge (

BOCK

 lub  E55

) are marked with an X in the type designation (e.g. 

FK

X

20/170 N).

 3.1  Refrigerants

•  HFKW / HFC: 

 

R134a, R404A/R507, R407C

•  HFCKW / HCFC:   

R22

3.2   Oil  charge

3.3  Limits of application

INFO! 

For recharging, we recommend the above oil types. See chapter 6.4.

Содержание BOCK FK20

























Отзывы: