Danfoss Air Flex Roof Hood, Руководство по установке, Страница: 4 / 8

Remove the foil and fix the bottom part on the roof. Adapt the
flexible "skirt" to the roof, starting from the center out . Use a rub-
ber mallet or other soft tool .
Note: Before the foil is removed ,it is important to clean the roof thor-
oughly from dust, dirt, moss etc.
After the skirt is assembled , lay back the surrounding tile.
Place the top upright (90 degrees) and secure with the screws pro-
vided .
Note: The upper part can be turned 180 degrees, depending on which
angle you want.
Fully assembled Danfoss Air Flex roof hood.
Installation Guide Danfoss Air Flex Roof Hood
VIGLA102 Danfoss Heating Solutions
4