manualshive.com logo in svg

Danfoss 51 Series, Инструкции по ремонту, Страница: 11 / 36

Поделиться
Скачать
Danfoss 51 Series Скачать руководство пользователя страница 11

1. Remove screws (L70) retaining the mounting flange (L35) to the main housing (B10).
2. Remove the mounting flange using a suitable puller.
3. Remove the O-ring (L50); discard.
4. Remove the shaft seal (L40) from the flange; discard.
5. Press shaft assembly out of main housing, taking care not to damage the shaft and speed sensor ring

(if installed).

C

Caution

Do not damage piston sockets.

Shaft removal (Cartridge)

1. Remove retaining ring (L80).
2. Remove seal carrier (L750).
3. Remove shaft seal (L40); discard.
4. Remove retaining ring (L80) for the shaft seal carrier (L750) from the bearing housing (L35).
5. Remove the screws (L70) retaining the bearing housing (L35) to the main housing (B10).
6. Separate the bearing housing from the main housing (B10).
7. Remove the retaining ring (L81) if present.
8. Remove spacer ring (L95).
9. Remove O-rings (L85 and L90, or gasket L82); discard.

Repair Instructions

Series 51 and 51-1 Bent Axis Motors Repair Instructions

Disassembly

11009449 • Rev BA • December 2014

11

Содержание 51 Series





































Отзывы:

Нет отзывов