Danfoss 140F1139, Инструкция по установке и эксплуатации, Страница: 15 / 48

Installation and User Guide DEVIreg™ Multi
FEC | Produced by Danfoss ©
15
4.4 Control modes, special functions, special statuses and settings
Each of 7 Channels has possibility to be individually set up with one of three control
modes – 1S (1 Sensor), PR (Power Regulation) and MOn / MOf ( Manually On/Of ) .
The controller configurations for these 3 modes are the following:
1 . Single sensor control with temperature sensor or
1S : one temperature sensor input,
one relay output;
2 . Power regulation control or time proportional power regulation or PR : no sensor
input, one relay output;
3 . Heating control Manually On and Manually Off with setting time period or MOn and
MOf : no sensor input, one relay output;
Together with any control mode could be set up or enabled/disabled some special functions
and statuses: “
Relay status RO/RC ”, “ CableOK? ”, “ Relay test 5/30 ”, “ Channel ON/OFF ” and
“ Device ON/OFF ” . Special functions and statuses are specified in chapters below .
Additionally, any Channel can be set up with status ‘not Active ’ or Active = No . It means
Channel does not work at all and “empty” line appears on the Main Screen .
4.4.1 Active and Not Active Channel status
Not Active status can be used for applications there is no need to use full channel set of 7 .
And view/line for the Channel which is not used is simply deleted from the screen .
By the way, standard factory setting for DEVIreg™ Multi supposes 1 active Channel #2 .
The Main Screen with the only one Active Channel #2 is as on the picture below: