3
© 2009 Danfoss Inc.
Programmable Thermostats 088L5130/5132
English
9
Press the
OK
button. The temperature setting will now fl ash in
the upper part of the display.
10
Press the
Up
or
Down
buttons to set the required temperature.
11
Press the
OK
button. The symbol for the next event (e.g. at
work) will now fl ash, allowing you to set the time and tempera-
ture for this period of the day by repeating steps 6-12.
12
Once time and temperature have been set for the four events
applicable for the 5-day period Monday to Friday,
Exit
will fl ash.
13
Press the
OK
button. The next 2 days,
Sat Sun
, will then fl ash.
Please note that now only two events (Day and Night) are dis-
played.
14
Press the
OK
button. The symbol for the fi rst event will fl ash.
15
Set the time and temperature for this event, and for the following
event, by repeating steps 6-12.
16
Finally, select
Exit
to exit the
Program
for a 5:2 schedule.
PROGRAM
SAT SUN
EXIT
SET TEMP
Quick Set Temperature
I want to permanently change the temperature for
the event currently active in the automatic program.
To do so, you must:
1
Press the
Up
or
Down
buttons to set the required temperature
for the event currently active.
2
Press the
OK
button.
The new temperature setting will then be saved and used for this
event in the future.
Example: If you change the temperature on a Tuesday morning
while the thermostat is running a 5:2 program, the new tempera-
ture will apply to all mornings from Monday to Friday.
Adaptive Preheat Feature
I want to ensure that the required temperature has
already been reached when I get up in the morning
or come home from work.
To do so, you must activate the adaptive function:
1
Press the
OK
button to activate the menu.
2
Press the
Up
or
Down
buttons until the
Settings
option fl ashes.
3
Press the
OK
button.
4
Press the
Up
or
Down
buttons until the
Adaptive
option
fl ashes.
5
Press the
OK
button. On or Off will now fl ash in the upper part
of the display.
6
Press the
Up
or
Down
buttons until
On
fl ashes.
7
Press the
OK
button.
8
Select
Exit
to exit the option.
Please note:
The adaptive preheat function is only related to the
4-event program and only works in connection with going from one
event to another where the temperature is going to be raised.
The adaptive preheat feature calculates when the thermostat must
start the heating system to ensure that the required temperature
is reached at the set time. Three days after the adaptive preheat
feature has been activated, it has learned when the heating must
be switched on to attain the required temperature.
Factory setting: ON
SETTINGS
TIME
DAY
CHILDLOCK
C°/F°
APPLICATION
OFFSET TEMP
READOUT
ADAPTIVE
DISPLAY
FACTORY RESET
EXIT
Manual Mode
I want to temporarily cancel the automatic 4-event
program and manually select temperature.
To do so, you must use manual mode:
1
Press the
OK
button to activate the menu.
2
Press the
Up
or
Down
buttons until the
Mode
option fl ashes.
3
Press the
OK
button.
4
Press the
Up
or
Down
buttons until
Man. mode
fl ashes in the
upper part of the display. The temperature will begin to fl ash.
5
Press the
Up
or
Down
buttons until the required temperature
fl ashes.
6
Press the
OK
button.
Please note:
This feature can be useful for instance if you are go-
ing on holiday and want to maintain a frost protection temperature
(e.g. 41°F) while you are away.
To return to the automatic 4-event program, you must select Auto.
Please refer to page 2 for instructions.
MAN. MODE
MODE
Temporary Override
I want to temporarily set a comfort temperature for
a single event, e.g. because I am not at work one
day and want to maintain a higher temperature or
because I am having a party.
To do so, must use override mode:
1
Press the
OK
button twice to activate the menu.
2
Press the
Up
or
Down
buttons until the
Mode
option fl ashes.
3
Press the
OK
button.
4
Press the
Up
or
Down
buttons until
Override
fl ashes in the up-
per part of the display. The temperature will begin to fl ash.
5
Press the
Up
or
Down
buttons until the required temperature
fl ashes.
6
Press the
OK
button.
