D&R GSM HYBRID, Руководство пользователя

Страница: 16 / 21

16
4
GETTING STARTED
4.1
Hardware Setup
1. Connect the GSM Hybrid to your PC with the delivered USB cable.
2. Connect the SEND (balanced audio input XLR female) to a (preferable) balanced mixer output of 4dBu. This
output has to be the mix of all signals except the signal coming from the hybrid itself to avoid feedback. An Aux. output
will do or in broadcast mixers a clean-feed is the best.
3. Connect the RECEIVE (balanced audio output XLR male) to a line input of the mixing console. Note that this signal is
NOT to be send to the output where the Hybrid’s input is connected to. So in case of use of an Aux send this local
channel Aux send needs to be turned off. In case of use of a clean-feed buss, this input channel needs to be
disconnected from the cleanfeed buss.
4. ***OPTIONAL: Position RECEIVE and SEND controls of the mixer in their mid position.
5. Connect the 12VDC supplied adapter to the power input connector. The On led on the front should be blinking for
around 8 seconds, indicating the unit is starting up. If the On led becomes steady green the unit is ready for normal
operation.