D&R AIRENCE Скачать руководство пользователя страница 39

Страница: 39 / 64

A I R E N C E - U S B M a n u a l P a g e 39

Configuration viewer

In the

configuration viewe

r section an overview of the entire configuration can be seen. All the pressed and released events of

the control signals are shown in the

Virtual Keyboard Mapping

area. In order to get a clear overview the view section is divided

into four pages:



Control Module (Pressed)



Control Module (Released)



USB Channels (Pressed)



USB Channels (Released)

Selecting one of the four pages is done by the radio buttons in the

Source Group Selection

and

Source Action

boxes which are

located above the

configuration viewer

section.

Figure 10. Page selection view

Let’s get connected

When done with setting up the configuration the Virtual Keyboard Mapper application is ready to receive changes of the control

signals from the Airence mixer. To do so, you have to press the

START

button in the Service box. If the application is able to con

nect to the Airence mixer the label on the button would change into

STOP

and the firmware revision of the mixer is shown.

The indicator near the button indicates incoming messages. Pressing the

STOP

button will stop the service and disconnect the

Airence mixer.

When a control signal is received and is mapped to a keystroke, this keystroke will be executed in real time. To let the executed

keystroke trigger a function in a software application you have to take care of giving this application Priority. An application is

only able to receive input when it currently has the highest priority in your screen activities.

Figure 7a. Disconnected Figure 7b. Connected

Presets

A preset is a backup of the entire configuration of the control signals with their mapped keystrokes. Presets can be useful when

you want to recall or store a complete configuration for specific play out software. Presets are represented as

.akp

files (Airence

Keyboard Preset).

Store preset

Storing the current configuration as a preset can be done by clicking on

File->Save

, or

File->Save as

Recall preset

Recalling a stored preset can be done by clicking on

File->Open

and selecting the desired preset.

Settings

Under

Settings->Presets you

can find the preset settings. A configuration window is shown whereby the default preset directory

and the startup preset can be configured.

Содержание AIRENCE

































































Результаты поиска

Содержание AIRENCE

Отзывы:

Бренды по названию

Популярные бренды

D&R AIRENCE, Руководство пользователя

Результаты поиска

Содержание AIRENCE

Отзывы:

Бренды по названию

Популярные бренды