background image

 

Explanation of graphical symbols

The lightning symbol within a triangle is intended to

alert the user to the presence of uninsulated

"dangerous voltages" within the unit’s chassis that may

be of sufficient magnitude to constitute a risk of electric

shock to humans.

 

The exclamation point within a triangle is intended to alert

the user to the presence of important operating and

service instructions in the literature accompanying the

product.

Before using this product, carefully read the

applicable items of the following safety

instructions.

 

 

1. Keep these instructions for future reference.
2. Read these instructions.
3. Heed all warnings.
4. Follow all instructions.
5.

WARNING!

To reduce the risk of fire or electric shock:

– Do not expose the rack assembly to rain or moisture.
– Keep water or other liquids away.
– Do not place liquid filled containers, for example

beverages, on top of the rack assembly.

– Do not operate the rack assembly while it is wet or standing

in liquid.

 

6. Do not use the rack assembly if its mains power cord is

damaged or frayed.
Protect the power cord from being walked upon or pinched,

particularly at the plugs and the point where it exits from the

rack assembly.

7. Use the mains plug of the rack assembly as the disconnecting

device and keep it readily accessible.

8. Lay all cables connected to the rack assembly carefully so that

they cannot be crushed by vehicles or other equipment and

that no one can either step on them or trip over them.

9. Unplug the rack assembly during lightning storms or when

unused for long periods of time.

IMPORTANT SAFETY INSTRUCTIONS

 

d&b Z5600.552 Manual 1.2 en

3

Содержание Z5600.552























Отзывы: