d&b audiotechnik Z5576.000, Руководство пользователя

Страница: 15 / 22

CAN-Bus network
CAN
Represents the CAN input of the first amplifier
while the other amplifiers are linked within the
rack.
CAN LINK
Represents the CAN output of the last
amplifier.
TERMINATE/
LINK
The built-in termination switch allows two
settings:
1.
LINK: In system racks, at the start of and
within a CAN-Bus segment, set the switch
to LINK.
2. TERMINATE: On the last system rack of
a CAN-Bus segment, set the switch to
TERMINATE
Note: A detailed description of remote control via the d&b
Remote network (CAN-Bus) is given in the technical
information TI 312 (d&b code D5312.EN) which can be
downloaded from the d&b website at www.dbaudio.com .
5.3. Z5333 Rack Link
The rack link cable allows multiple system racks to be linked
together.
It is suitable for both analog and digital audio signals as well as
for network wiring (Ethernet or CAN-Bus networks).
Technical specifications
Audio connector 2 x XLR female to 2 x XLR male
with color markup
Audio signal capability Analog
Digital AES3
Network connector etherCON
Network cable CAT 5E STP
Length 2 m / 6.5 ft
I/O panel, rack link example:
2ch Analog audio and CAN
d&b Z5576.000 Manual 1.1 en 15