Z5455 AL Flying frame
1.1 Safety
1.1.1 Intended use
The Z5455 AL Flying frame must only be used in conjunction with
the d&b A-Series AL60/AL90 and ALi60/ALi90 cabinets, as
described in this manual.
A-Series vertical arrays and ArrayCalc
A vertical A-Series array can consist of up to four loudspeakers for
mobile and installed applications where the captive rigging
components and the normal mounting accessories are to be used.
For installed applications where more than four loudspeakers are
required in a vertical array, ArrayCalc allows the prediction of
arrays with up to six A-Series loudspeakers.
Note: Please note that arrays of more than 4 loudspeakers
can only be mounted using custom cabinets and custom-
designed mounting accessories and require the array to be
driven with ArrayProcessing. For these special applications,
please consult with your d&b sales partner.
1.1.2 General safety
Installation and setup should only be carried out by qualified and
authorized personnel observing the valid national Rules for the
Prevention of Accidents (RPA).
It is the responsibility of the person installing the assembly to ensure
that the suspension/fixing points are suitable for the intended use.
Always carry out a visual and functional inspection of the items
before use. In case there is any doubt as to the proper functioning
and safety of the items, these must be withdrawn from use
immediately.
Chapter 4 "Care and maintenance"
1.1.3 Load safety information
NOTICE!
The Z5455 AL Flying frame is designed to suspend a total of 4 x
AL60/AL90 or ALi60/ALi90 cabinets which corresponds to a total
system weight of 100 kg (220 lb) – SWL.
1 Z5455 AL Flying frame
d&b Z5455
AL Flying frame Rigging manual 1.1 en
4
